electromagnetic flow meter water meter calibration system

Measuring medium: Various gases (except acetylene gas)
Pipe diameter range: DN10-2000mm
Accuracy Degree: ±1～2.5%
Pipe material: Carbon steel, stainless steel, plastic, etc
The thermal mass flowmeter is a flow meter based on the principle of thermal diffusion. The device uses the constant temperature difference method to measure the gas accurately. It has the advantages of small size, high digitization, easy installation, accurate measurement and so on.

Liquid turbine flowmeter is a kind of precision flow measuring instrument, which can be used to measure the flow and total amount of liquid with the corresponding flow integrating instrument. Liquid turbine flowmeters are widely used in measurement and control systems in petroleum, chemical industry, metallurgy, scientific research and other fields. Liquid turbine flowmeters with sanitary fittings can be used in the pharmaceutical industry.

Measuring medium: Various gases (except acetylene gas)
Diameter range: Caliber DN32 or higher
Accuracy: ±1～2.5%
Pipe material: Integrated structure, separate structure

Aister specializes in gas and liquid flow measurement, creating a one-stop service platform to provide you with the most suitable solution

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

electromagnetic flow meter water meter calibration system, from DN3 -DN800, all flow meters need to be calibrated one by one before shipment

Measuring medium: single sound conducting liquid medium
Measuring range: ± 0.03ft /s~ ± 40ft /s (± 0.01m /s~ ± 12m /s)
Accuracy class: ±1%
Pipe diameter range: 1″~48″(25mm~1200mm)

Measuring medium: Various liquids, such as water, oil, chemicals, solvents, and various other liquid media
Measuring Cycle: 1.5 seconds
Pressure range: ±0.1MPa (press definitely)
Liquid level: 4m,6m,8m,12m,20m,30m

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Nominal diameter: DN15-DN200mm
Accuracy： ±1%R、±0.5%R、±0.2%R (to be customized)
Instrument type: Field display type, pulse output type, 4-20mA output type, split remote display type
Applicable medium: No impurities, low viscosity, no strong corrosive liquid

Nominal diameter： DN15-DN200mm
Accuracy： 1.0/1.5
Body material: Aluminum alloy, 304 stainless steel
Applicable media: Compressed air, oxygen, nitrogen, carbon dioxide, natural gas, argon, liquefied gas, etc., corrosion, moisture can not be measured, such as chlorine, hydrogen, steam, ammonia.

Application: Slightly corrosive liquid, stirring, condensation
Measuring range: 120 m
Medium temperature: – 40 ~ 120 °
Process pressure: 0.1 ~ 0.3 mpa