Main points of steam flowmeter selection

Vortex flowmeters are not only suitable for measuring a variety of low viscosity liquids, but also mainly for industrial measurement of gases and vapors. When measuring the volume flow of gas, vortex flowmeters are not affected by changes in fluid temperature, pressure, density, viscosity and other properties, so the measurement is very accurate and is the first choice for measuring air.

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

The insertion vortex flowmeter is mainly used for the flow measurement of large-diameter gas, liquid and steam medium in industrial pipelines. In order to ensure the accuracy of its measurement, the following points should be noted when installing:

The vapor flowmeter has no moving parts, strong reliability, high precision, long life, and can measure the instantaneous flow and cumulative flow of liquid in a wide flow range.

Many owners will occasionally encounter that the vortex flowmeter does not have a flow display when using the vortex flowmeter. For this situation, Aister gives the following treatment methods:

vortex flow meter on production line, waiting to be assembled and calibration. vortex flow meter is used for measure steam, it can stand high temperature and high pressure

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flowmeters:

The structure of the vortex flowmeter is relatively simple, only the sensor and the display instrument are composed of two parts, and the measurement accuracy and stability are also relatively stable.

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

In the process of diameter selection of vortex flowmeter, special attention should be paid to the fact that the diameter of vortex flowmeter cannot be selected according to the original pipe diameter on site. The diameter of the vortex flowmeter should be determined according to the parameters in the pipeline such as the flow range of the medium in the pipeline, working temperature and working pressure, and then combined with the technical parameters of the vortex flowmeter.

The working principle of vortex flowmeter is to place a non-streamlined vortex generator in the fluid, so that the fluid is alternately separated on both sides of the generator, releasing two series of regularly staggered vortex flowmeter. In a certain range, the vortex separation frequency is proportional to the flow rate, and the vortex flowmeter can measure the flow rate of the medium by calculating the vortex separation frequency.

When choosing the right ammonia flow meter for you, several factors need to be considered to ensure the accuracy of the measurement results and the reliability of the equipment. Here’s a detailed buying guide:

Vortex flowmeter is used to generate stable vortices when the fluid flows through the obstruction, and the flow measurement is achieved by measuring the frequency of the vortices. Vortex flowmeter is composed of vortex flow sensor and flow display instrument. The display instrument is a general flow display instrument. The following introduces the installation points of steam flowmeter.

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

Measured Medium: Liquid, Gas, Steam
Medium Temp: -40℃~+200℃; -40℃~+280℃; 40℃~+350℃
Nominal Pressure: 1.6MPa;2.5MPa;4.0MPa;6.4MPa(Other pressure can be custom,need consult supplier)
Accuracy: 1.0%(Flange), 1.5%(Insertion)
Material: SS304(Standard), SS316(Optional)

The water and wastewater treatment sector also benefits significantly from vortex flow meters. These meters are used to measure the flow of water in pipes, helping to monitor consumption, detect leaks, and optimize water treatment processes. Their robust construction and suitability for both clean and dirty water make vortex flow meters essential tools for managing water resources effectively.

In the process of using the steam flowmeter, we may encounter some minor failures, do not panic after the problem, find out how to deal with is the key. The following introduces several common faults of steam flowmeters and their solutions.

Intelligent vortex flowmeters can measure air. Vortex flowmeter is a new flowmeter for flow measurement based on Karman vortex principle. It has good medium adaptability and can directly measure the volume flow of various media (including air). When measuring air, the vortex flowmeter generates regular vortices through the triangular column vortex generator set in the fluid, and the frequency of these vortices is proportional to the average velocity of the measured medium, so that the air flow can be calculated.

Vortex flowmeter is widely used in various industrial environments, in view of some small problems commonly encountered in the installation of vortex flowmeter, Aister gives the following points, hoping to solve the problems encountered in the installation.

In the realm of water and wastewater treatment, vortex flow meters are indispensable tools for monitoring and controlling the flow of water through pipelines. Municipalities and industrial facilities rely on these meters to measure the volume of water being processed and distributed, facilitating efficient water management. Additionally, vortex flow meters are often employed in chemical processing plants to measure the flow rates of various chemicals and ensure precise dosing in manufacturing processes. Their robust design and resistance to corrosive substances make them well-suited for these demanding environments, contributing to the overall reliability and accuracy of industrial processes.

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems:

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

With the continuous production progress of the reform and opening up industry, it has been applied in more and more industries, and the vortex flowmeter is widely used in large, medium and small pipeline water supply and drainage, industrial circulation, and sewage treatment. Oil and chemical reagents as well as compressed air, saturated vapor and superheated vapor, natural gas flow measurement of various media and can be used as a flow transmitter in automated control systems.

As a very special medium, steam will show special phenomena and problems in the process of vortex flowmeter measurement. The key problem is that the vapor density value deviates too much from the design value, which brings significant measurement errors to the measurement results. At present, the density measuring instrument with mature technology has not been successfully applied, which brings certain difficulties to the steam flow measurement.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. In addition to the characteristics of the aforementioned vortex flowmeter, it also has the following characteristics:

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, steam and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. There are no moving mechanical parts, so the reliability is high, the maintenance is small, and the instrument parameters can be stable for a long time.

Vortex flowmeter is one of the commonly used instruments in daily production, therefore, failure will occur from time to time, the main reasons for the inaccurate flow accuracy of the vortex include: the influence of temperature on the measurement, the influence of the accumulation of the vortex generating body on the flow surface, the influence caused by the inconsistency between the distribution tube and the inner flow meter.

Vortex flowmeter can be widely used in large, medium and small kinds of pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagents and compressed air, saturated and superheated steam, natural gas and various media flow measurement and can be used as a flow transmitter in automatic control system, long service life. Points of attention for vortex flowmeter installation:

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

Vortex flowmeter is a new flowmeter successfully developed on the basis of Karman vortex principle. Vortex flowmeter is suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquid. How to ensure the accuracy of vortex flowmeter measurement during installation?