What are the advantages and disadvantages of temperature and pressure compensated vortex flowmeters

Vortex flowmeter is widely used in various industrial environments, in view of some small problems commonly encountered in the installation of vortex flowmeter, Aister gives the following points, hoping to solve the problems encountered in the installation.

For energy measurement

Energy can be classified into primary energy, secondary energy, etc. Energy measurement is the scientific management of energy to achieve energy conservation and consumption reduction.

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

At present, there are many misunderstandings about steam measurement in China, and many users often think that buying a high-price flowmeter can get accurate measurement results. The measurement of steam is different from other fluids such as water, air and other media, and there are many factors affecting its measurement in the actual measurement. Therefore, there is often a phenomenon that the flow meter itself is qualified, but the actual measurement is not “allowed”. So what’s the problem with these factors?

vortex flow meter is a specialized instrument designed for measuring the flow rate of liquids, gases, or steam in various industrial processes. It operates on the principle of the Von Kármán effect, where a bluff body (typically a shedder bar or a blunt object) is placed in the flow stream. As the fluid passes by the bluff body, vortices are formed alternately on either side, creating a pattern. The frequency of these vortices is directly proportional to the velocity of the flowing fluid, allowing the vortex flow meter to accurately determine the flow rate.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Nominal diameter: DN15～DN300mm
Accuracy: liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Structure form: Integrated, split, temperature and pressure compensation
Applicable medium: liquid, gas, saturated steam, superheated steam

The insertion vortex flowmeter is mainly used for the flow measurement of large-diameter gas, liquid and steam medium in industrial pipelines. In order to ensure the accuracy of its measurement, the following points should be noted when installing:

The measurement accuracy of the steam flowmeter is closely related to the pressure and temperature of the steam. Pressure compensation is recommended for measuring saturated steam, while temperature and pressure compensation is adopted for measuring superheated steam.

Precession vortex flowmeter without mechanical moving parts, small size, corrosion resistance, stable performance; It can directly display the working pressure, temperature, flow rate and gas volume under standard state of the medium; With the advantages of wide measuring range and small measuring error, the precession vortex flowmeter has been widely used in the production measurement of oil and gas Wells and the sales measurement of natural gas.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. In addition to the characteristics of the aforementioned vortex flowmeter, it also has the following characteristics:

Vortex flowmeters play an important role in the measurement of steam, gas and liquid flow due to their simple structure, high reliability and wide application range. The probe, as its core sensing component, directly affects the measurement accuracy and stability of the instrument. This article will comprehensively analyze the key technologies of vortex flowmeter probes for you, helping you make a worry-free selection!

Vortex flowmeter has high requirements for installation and working environment, and the front and rear straight pipe sections must be installed in accordance with the specifications.

Vortex flowmeters are suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquids. We often encounter the following failures in the use of vortex flowmeters:

Vortex flowmeter is also known as Karman vortex flowmeter. Vortex flowmeter is a kind of separation flowmeter made by using the principle of natural oscillation of fluid. When a fluid flows at a sufficiently large velocity through an object perpendicular to the direction of the fluid, if the object is of appropriate size, it will produce a neatly aligned and reversed vortex train behind the object along two parallel lines.

1. There is fluid flow in the pipeline after power-on, but no signal output

When choosing the right ammonia flow meter for you, several factors need to be considered to ensure the accuracy of the measurement results and the reliability of the equipment. Here’s a detailed buying guide:

1. Vibration effect

Compressed air is generated by air compressor or high pressure fan. When these devices are in operation, they all have varying degrees of vibration, and sometimes the vibration is relatively strong, and this vibration is transmitted through the connecting pipe. When selecting and determining the position of the vortex flowmeter, this influencing factor should be fully considered. In various detection methods, the anti-vibration performance of the instrument is not the same due to different detection components. For the vortex street of the detection element, the vibration resistance can reach 0.5~1G. When determining the installation position of the vortex flowmeter, it should be as far away from the power equipment such as air compressors and fans as possible.

Vortex flowmeter is also known as Karman vortex flowmeter. It is a separation flowmeter made of the principle of natural oscillation of fluid. When a fluid flows at a sufficiently large velocity through an object perpendicular to the direction of the fluid, if the object is of appropriate size, it will produce a neatly aligned and reversed vortex train behind the object along two parallel lines.

Vortex flowmeters are widely used in the measurement of steam, gas and liquid flow due to their simple structure, high reliability and wide application range. However, this type of flowmeter is not omnipotent and may experience severe errors or even failure under certain working conditions. This article will reveal five key limitations of vortex flowmeters to help users avoid selection risks.

The power supply methods of the helical vortex flowmeter are diverse to meet the demands of different application scenarios. The main power supply methods include the following:

With the continuous production progress of the reform and opening up industry, it has been applied in more and more industries, and the vortex flowmeter is widely used in large, medium and small pipeline water supply and drainage, industrial circulation, and sewage treatment.

In industrial process control, energy measurement and gas/liquid flow monitoring, vortex flowmeters have become an important choice for flow measurement due to their advantages such as simple structure, wide range and high stability. However, in the face of different working conditions and application requirements, how to make the correct selection is of vital importance. This article will start from the key parameters to provide you with a detailed analysis of the selection points of vortex flowmeters, helping you achieve the best configuration.

Vortex flowmeter is a new flowmeter successfully developed on the basis of Karman vortex principle. Vortex flowmeter is suitable for measuring the mass flow and volume flow of superheated steam, saturated steam, compressed air, general gas, water and low corrosive liquid. How to ensure the accuracy of vortex flowmeter measurement during installation?

Whether the temperature and pressure compensation is required for steam measurement by vortex flowmeter mainly depends on the properties of the steam being measured and the requirements of measurement accuracy.

Steam flowmeters are mainly used for flow measurement of industrial pipeline media fluids, such as gases, liquids, steam and various other media. Its characteristics are low pressure loss, wide measurement range, high accuracy, and it is almost unaffected by parameters such as fluid density, pressure, temperature, and viscosity when measuring the volumetric flow rate under working conditions.

In chemical processing plants, vortex flow meters play a crucial role in measuring the flow of corrosive or abrasive liquids. Their resistance to harsh chemical environments, combined with their ability to offer accurate readings even in challenging conditions, makes them valuable assets for ensuring the efficiency and safety of chemical processes. The meters’ capability to handle different fluid types and maintain accuracy contributes to their widespread adoption in chemical industries.

The vapor flowmeter has no moving parts, strong reliability, high precision, long life, and can measure the instantaneous flow and cumulative flow of liquid in a wide flow range.

Due to the compressibility of the gas, its flow measurement is more complex than that of the liquid, and the output signal of the vortex flowmeter is related to the gas density in addition to the input signal, and the density of the gas is a function of temperature and pressure (referred to as temperature and pressure).

Vortex flowmeter is a new type flowmeter for measuring fluid flow in closed pipeline according to Karman vortex principle. It is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, vapor and other media. It is characterized by small pressure loss, large range, high accuracy, and is almost not affected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions.

The vortex flowmeter is used in measuring coke oven gas, and the coke oven gas in some coke plants has been developed in the direction of civil gas. As a result, the problem of gas measurement becomes more and more prominent, and the demand for accuracy of gas measurement becomes higher and higher. However, there will be some problems in use, let’s talk about the causes and solutions of these problems: