Which industry fields can intelligent vortex flowmeters be applied to

1. Requirements for piping:

The inner diameter of the upstream and downstream piping at the installation point of the steam flowmeter is the same as the inner diameter of the flowmeter.

Vortex flowmeter is a velocity flowmeter, which measures the volume flow rate in the working state. If you choose the table according to the volume flow rate, the mass flow rate provided by the customer should be converted into the volume flow rate under the working state, and then determine the diameter of the selected instrument against the volume flow parameter.

Vortex flowmeter is a kind of fluid oscillating flow detection instrument based on Karman vortex principle. It is characterized by small pressure loss, wide range and high measurement accuracy. It is almost unaffected by fluid density, pressure, temperature, viscosity and other parameters when measuring volume flow under working conditions. In daily use, there may be problems such as large measurement errors, so we need to eliminate problems from the following aspects:

Accuracy is another significant advantage of vortex flow meters. With advancements in technology, modern vortex flow meters can provide precise and repeatable measurements even in challenging flow conditions. This high level of accuracy makes them indispensable for applications where tight control over fluid flow rates is critical, such as in chemical manufacturing or custody transfer operations in the oil and gas industry.

1. Vibration effect

Compressed air is generated by air compressor or high pressure fan. When these devices are in operation, they all have varying degrees of vibration, and sometimes the vibration is relatively strong, and this vibration is transmitted through the connecting pipe. When selecting and determining the position of the vortex flowmeter, this influencing factor should be fully considered. In various detection methods, the anti-vibration performance of the instrument is not the same due to different detection components. For the vortex street of the detection element, the vibration resistance can reach 0.5~1G. When determining the installation position of the vortex flowmeter, it should be as far away from the power equipment such as air compressors and fans as possible.

The factors that affect the accurate measurement of vapor gas flowmeter are mainly the following:

Vortex flowmeter is widely used because of its wide range, small pressure loss, medium accuracy, linear output, no moving parts, high reliability, small maintenance, medium low price, relatively high performance and price characteristics.

Vortex flow meters are highly versatile instruments widely utilized in various industrial applications to measure the flow of liquids, gases, and steam. One prominent application of vortex flow meters is in the oil and gas industry, where they play a crucial role in measuring the flow rates of hydrocarbons through pipelines. These meters are particularly adept at handling the challenging conditions present in oil and gas operations, including high pressures and temperatures. By accurately measuring flow rates, vortex flow meters contribute to efficient process control and optimization, ensuring that production and transportation systems operate smoothly and cost-effectively.

In the process of using the steam flowmeter, we may encounter some minor failures, do not panic after the problem, find out how to deal with is the key. The following introduces several common faults of steam flowmeters and their solutions.

1, pulse vortex flowmeter is a kind of high measurement accuracy, simple installation, small maintenance, a wide range of meters, is currently widely used in petrochemical, metallurgy, textile, urban construction, energy and other industries.

The working principle of vortex flowmeter is to place a non-streamlined vortex generator in the fluid, so that the fluid is alternately separated on both sides of the generator, releasing two series of regularly staggered vortex flowmeter. In a certain range, the vortex separation frequency is proportional to the flow rate, and the vortex flowmeter can measure the flow rate of the medium by calculating the vortex separation frequency.

In modern industrial production, efficient and accurate flow measurement is the key to ensuring process stability and improving energy efficiency management. Vortex flowmeters, with their advantages of simple structure, high reliability and wide application range, have become the “main force” in flow monitoring in industries such as petrochemicals, energy and power, metallurgy and pharmaceuticals, providing solid support for the intelligent upgrade of industry.

In industrial process control, energy measurement and gas/liquid flow monitoring, vortex flowmeters have become an important choice for flow measurement due to their advantages such as simple structure, wide range and high stability. However, in the face of different working conditions and application requirements, how to make the correct selection is of vital importance. This article will start from the key parameters to provide you with a detailed analysis of the selection points of vortex flowmeters, helping you achieve the best configuration.

1, pulse vortex flowmeter is a kind of high measurement accuracy, simple installation, small maintenance, a wide range of meters, is currently widely used in petrochemical, metallurgy, textile, urban construction, energy and other industries.

Vortex flow meters find diverse applications across industries where accurate measurement and monitoring of fluid flow are critical. One prominent use is in the oil and gas sector, where vortex flow meters are employed to measure the flow rates of various hydrocarbons. These meters excel in handling the challenges posed by the varying viscosities and temperatures of oil and gas, providing reliable measurements for custody transfer, production monitoring, and process optimization.

Reliability is a hallmark of vortex flow meters, as they exhibit robust performance in harsh operating conditions. Their simple yet sturdy design, often featuring no moving parts, results in minimal maintenance requirements and increased longevity. This reliability is particularly crucial in industries where consistent and accurate flow measurement is essential for process control and optimization.

The ethane Flow Meter Purchase Guide is designed to help you choose the best solution for your needs. In the purchase process, it is necessary to consider the nature, use, safety, measurement accuracy, stability, cost and other factors. Here is a detailed shopping guide:

Gas flowmeter is a general term for many measurable gas flows. Today, we mainly explain the installation conditions of vortex flowmeter.

One of the notable advantages of vortex flow meters is their versatility, as they can be employed in a wide range of applications across different industries. They are particularly useful for measuring the flow of fluids with varying viscosities, making them suitable for applications in petrochemical, pharmaceutical, and water treatment industries. Additionally, vortex flow meters are known for their ability to handle both high and low-flow conditions with consistent accuracy, providing reliable measurements across a broad operational range.

Measuring medium：Liquid, gas, saturated steam, superheated steam
Accuracy：Liquid ±1.0%, gas (steam) ±1.5%, plug-in ±2.5%
Working pressure：1.6MPa，2.5MPa，4.0MPa，6.4MPa
Medium temperature：Ordinary type -40 ~ 150℃
Medium temperature type -40 ~ 250℃
High temperature type -40 ~ 350℃
Output signal：Three-wire voltage pulse, low level 0 ~ 1V,
high level > 4V, duty cycle 50%;
Two-wire system standard current 4 ~ 20mA;
Three-wire system standard current 0 ~ 10mA
Working environment：-35℃～+60℃，Humidity ≤95%RH
Working power supply：DC12V；DC24V
Material：Carbon steel, stainless steel
Explosion-proof type：Intrinsically safe ExibIICT6

Vortex flowmeters are not only suitable for measuring a variety of low viscosity liquids, but also mainly for industrial measurement of gases and vapors. When measuring the volume flow of gas, vortex flowmeters are not affected by changes in fluid temperature, pressure, density, viscosity and other properties, so the measurement is very accurate and is the first choice for measuring air.

Vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluids, such as gas, liquid, steam and other media. There are special phenomena and problems in the process of measurement. One of the key problems is that the vapor density value deviates too much from the design value, which brings significant measurement errors to the measurement results. At present, the density measurement instrument with mature technology has not been successfully applied, which brings certain difficulties to the steam flow measurement.

There are many types of flow meters for measuring nitrogen, and each type has its specific application scenarios and advantages. Here are some common nitrogen flowmeters:

Vortex flow meters offer a host of advantages that make them a preferred choice in various industrial applications. One key advantage is their versatility in measuring the flow of liquids, gases, and steam. Unlike some other flow measurement technologies, vortex flow meters can handle a wide range of fluids, making them suitable for diverse industries such as oil and gas, water treatment, chemical processing, and HVAC systems.

Vortex flowmeter is based on the Karman vortex street principle, which is mainly performed by setting a non-streamlined vortex generator (resistance fluid) in the flowing fluid, and alternately producing two columns of regular vortices from both sides of the vortex generator.

Another notable application of vortex flow meters is in the field of HVAC (Heating, Ventilation, and Air Conditioning) systems. These meters accurately measure the flow of chilled water or air, providing essential data for optimizing system performance and energy efficiency. By monitoring flow rates in HVAC systems, vortex flow meters help maintain ideal conditions in buildings, ensuring proper temperature control and minimizing energy consumption. In summary, vortex flow meters find widespread application across diverse industries, offering a reliable and cost-effective solution for measuring fluid flow in a variety of challenging environments.

1. After power-on, there is fluid flow in the pipeline, but the vortex flowmeter has no signal output

The power supply methods of the helical vortex flowmeter are diverse to meet the demands of different application scenarios. The main power supply methods include the following:

Vortex flowmeters are versatile instruments commonly used in various industries for fluid flow measurement. Here are some applications of vortex flowmeters in different industries:

When selecting the right air flow meter product, a number of factors need to be considered to ensure that the selected product can meet the actual needs and has good performance. Here is a detailed buying guide to help you choose the best air flowmeter:

As a very special medium, steam will show special phenomena and problems in the process of vortex flowmeter measurement. The key problem is that the vapor density value deviates too much from the design value, which brings significant measurement errors to the measurement results. At present, the density measuring instrument with mature technology has not been successfully applied, which brings certain difficulties to the steam flow measurement.