Characteristics of sewage electromagnetic flowmeter

Electromagnetic flowmeter is composed of electromagnetic flow sensor and electromagnetic flow converter. The main components are measuring tube, electrode, excitation coil, iron core and yoke, housing. The measuring tube of the sensor is a short non-magnetic alloy tube lined with insulating material.

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Electromagnetic flowmeter in the use of precautions and installation requirements

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

What are the requirements for the installation environment of the electromagnetic flow meter?

Electromagnetic flowmeters generally operate normally for a long time without maintenance after installation, and then require maintenance and daily inspection.

1, the role of the electromagnetic flowmeter grounding ring: the grounding ring is directly in contact with the medium through the grounding electrode, and then the grounding ring is grounded with the flange of the electromagnetic flowmeter to achieve equal potential with the ground to eliminate interference.

In the electromagnetic flowmeter installation and debugging stage there will be some failures, below, we will understand the specific causes of the failure at this stage and their elimination methods.

What are the advantages of electromagnetic flowmeter measurement for sewage measurement? The plug-in electromagnetic flowmeter is composed of two parts: flow sensor and transmitter.

The transducer in the split electromagnetic flowmeter can form a body or separate type with the sensor, the integrated electromagnetic flowmeter is the integrated electromagnetic flowmeter, the split type becomes the split electromagnetic flowmeter, the flowmeter is a two-way measurement system, and the three integrators are installed: the forward total, the reverse total and the difference total

Intelligent electromagnetic flowmeter measurement accuracy is high, stable performance, is a very common product in the flow meter, widely used in petroleum, chemical, food and other industries, especially water resources system, almost everywhere can see the figure of intelligent electromagnetic flowmeter, but the measured medium in these occasions is a single liquid, then with intelligent electromagnetic flowmeter can measure the mixture, Is a lot of owners are very want to know, I hope that today through this article to answer everyone’s doubts.

Compared with other flow measuring instruments, electromagnetic flowmeters have the following outstanding advantages

Fixed the electromagnetic flowmeter for periodic visual inspection, check the environment around the instrument, clean dirt, ensure that no water and other substances, check whether the wiring is good, check whether the electromagnetic flowmeter near the new installation of strong electromagnetic field equipment or a new wire across the instrument.

Electromagnetic flowmeter, with high precision, long life characteristics, in chemical industry, environmental protection, metallurgy and other fields and industries have been applied. However, in the process of use, due to the influence of many factors, it is easy to cause the inaccurate measurement results of the electromagnetic flowmeter. So what are the reasons for the error of the electromagnetic flowmeter?

In the flow measurement of domestic sewage, it is very important to choose the right flowmeter to ensure the accuracy and reliability of the measurement results. Here are some suggestions to help you choose the right flowmeter for domestic sewage:

Electromagnetic flowmeters can measure mud. The electromagnetic flowmeter utilizes the principle of Faraday’s law of electromagnetic induction. It calculates the flow rate by measuring the induced electromotive force generated when a conductive liquid flows in a magnetic field. It has the advantages of high precision, no mechanical wear, and bidirectional measurement. Mud, as a conductive liquid containing a large amount of solid particles, although it has high requirements for measuring equipment, electromagnetic flowmeters, due to their unique measurement principles and superior performance, have become the ideal choice for measuring mud flow.

Electromagnetic flowmeter is based on the principle of electromagnetic induction, through the electromotive force generated by the conductive fluid through the external magnetic field to measure the fluid flow meter. Electromagnetic flowmeter is widely used because of its high precision and good stability, so the choice of integrated or split electromagnetic flowmeter is particularly important.

Precision and flow rate of electromagnetic flow meter

Electromagnetic flow meters offer several advantages, making them a popular choice in various industrial applications. Here are some of the key advantages of electromagnetic flow meters:

In the field of industrial processes, electromagnetic flowmeters are extensively employed for measuring the flow of liquids such as chemicals, acids, and slurries. Their capability to handle corrosive fluids and resist wear makes them invaluable in industries like chemical manufacturing, pharmaceuticals, and food and beverage production. In these applications, electromagnetic flowmeters contribute to process optimization, ensuring precise control of fluid volumes and enhancing overall operational efficiency.

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
Accuracy: +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode: SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium
Structure Type: Integral type, remote type, submersible type, ex-proof type
Medium Temperature: -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature: -20~+60deg C
Ambient Humidity: 5-100%RH(relative humidity)
Measuring Range： Max 15m/s
Conductivity： >5us/cm

The installation of the electromagnetic flowmeter depends on the requirements of the customer’s working conditions, and then select the type, and install it according to the instructions or the guidance of the flowmeter manufacturer’s staff. The following points need to be noted when installing the electromagnetic flowmeter:

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Electromagnetic flowmeter in the industry has achieved good results, then as the core accessories of electromagnetic flowmeter – electrode, electrode is contact with the measured medium more accessories, then the cleaning details of the electrode is a crucial point, of course, also pay attention to a certain method.

The selection of circulating water flowmeter is a decision process involving many aspects, which needs to consider the characteristics of circulating water, measurement requirements, environmental conditions, economic costs and the performance characteristics of the flowmeter. Here is a comprehensive analysis and recommendations for the best options:

Size: DN3-DN3000mm
Nominal Pressure: 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
Accuracy: +/-0.5%(Standard), 0.3% or 0.2% (Optional)
Liner: PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Output Signal: 4-20mA/Pulse

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Reasonable selection and correct installation of the electromagnetic flowmeter is very important to ensure the measurement accuracy and extend the service life of the instrument. The following is a brief introduction to the selection of electromagnetic flowmeter principles, installation conditions and precautions for use.

Electromagnetic flowmeter is designed for the measurement of conductive liquid instrument, its high accuracy, wide range ratio, internal no moving parts, open flow parts, no pressure loss. Excellent corrosion resistance, high pressure resistance, strong adaptability, has been widely used in various production fields. Because some installation sites are more complex, it is inevitable to produce a variety of interference, Aister instrument to explain several common electromagnetic flow meter anti-interference methods:

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Electromagnetic flowmeter at work requires that the measured medium must be ground potential, generally through the pipeline or flange ground, if the process pipe connected to the sensor relative to the measured medium is insulated (plastic pipe or pipe with an insulating lining), you must choose a grounding ring or sensor with a grounding electrode, so that the measured medium in the ground potential, easy to be ignored in the actual design and installation.