Good Quality Flange Electromagnetic Flowmeter Water Milk Flow Meter

The measuring channel of the electromagnetic flowmeter is a smooth straight pipe of an unimpeded flow detector, which is not easy to block and is suitable for measuring liquid-solid two-phase fluids containing solid particles or fibers, such as paper pulp, coal water pulp, mineral pulp, mud and sewage.

What are the advantages of electromagnetic flowmeter measurement for sewage measurement? The plug-in electromagnetic flowmeter is composed of two parts: flow sensor and transmitter.

Intelligent electromagnetic flowmeter measurement accuracy is high, stable performance, is a very common product in the flow meter, widely used in petroleum, chemical, food and other industries, especially water resources system, almost everywhere can see the figure of intelligent electromagnetic flowmeter, but the measured medium in these occasions is a single liquid, then with intelligent electromagnetic flowmeter can measure the mixture, Aister meter is your answer.

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

An electromagnetic flowmeter is an instrument that can be used to measure the volume flow of various conductive liquids in pipes and channels. Its characteristics are as follows:

Electromagnetic flowmeter as a widely used precision instrument products, whether it is the purchase, installation and commissioning and use process need to spend a lot of energy, then, the use of electromagnetic flowmeter should pay attention to what problems?

Electromagnetic flowmeter, with high precision, long life characteristics, in chemical industry, environmental protection, metallurgy and other fields and industries have been applied.

In the electromagnetic flowmeter installation and debugging stage there will be some failures, below, we will understand the specific causes of the failure at this stage and their elimination methods.

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Drainage flowmeter, sewage outfall flowmeter installation position

Split electromagnetic flowmeters are mainly used to measure the volume flow of conductive liquid and slurry in closed pipes. Including acid, alkali, salt and other highly corrosive liquids.

The plug-in electromagnetic flowmeter has a wide range of applications, and can be used to measure the volume flow of conductive liquid and slurry in closed pipelines in many fields such as petroleum, chemical industry, metallurgy, paper making, environmental protection, municipal management, water conservancy construction and so on.

Selecting the appropriate installation point for an electromagnetic flowmeter is crucial for accurate and reliable measurements. Here are some considerations and guidelines to help you choose the right measuring installation point:

Compared with other flow measuring instruments, electromagnetic flowmeters have the following outstanding advantages

The selection of flow meters should consider many factors, such as diameter size, medium flow, pressure, density, fluid flow state, installation environment, etc., so how to choose a large number of sewage flowmeters?

In the flow measurement of domestic sewage, it is very important to choose the right flowmeter to ensure the accuracy and reliability of the measurement results. Here are some suggestions to help you choose the right flowmeter for domestic sewage:

Electromagnetic flowmeters, also known as magmeters, are devices that measure the flow of electrically conductive fluids using the principles of electromagnetic induction. There are several types of electromagnetic flowmeters, each with its own characteristics and applications. Here are some common types:

Electromagnetic flowmeter in use, we need to pay attention to what? Today for you to do a simple description, I hope you pay attention to the following points about the maintenance of electromagnetic flowmeters:

In the metering industry, electromagnetic flowmeter is a basic metering tool, and its range of use is very wide. The emergence of electromagnetic flowmeters has made great contributions to many industries, and it occupies a very important position in these industries. Pay more attention when using the electromagnetic flowmeter, check it before use to see how accurate its measurement is. The calibration of electromagnetic flowmeter is mainly considered from the following aspects:

Electromagnetic flowmeter is a speed meter to measure the volume flow of conductive media. While carrying out on-site monitoring and display, it can output standard current signals for recording, adjustment and control, realizing automatic control of detection, and realizing long-distance transmission of signals. It can be widely used in water, chemical, coal, environmental protection, textile, metallurgy, paper and other industries in the flow measurement of conductive liquid. The structure of the instrument has one type and one type.

Performance Technical parameter
Size DN3-DN3000mm
Nominal Pressure 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa…Max 42Mpa)
Accuracy +/-0.5%(Standard)     +/-0.3% or +/-0.2%(Optional)
Liner PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA
Electrode SUS316L, Hastelloy B, Hastelloy C       Titanium, Tantalum, Platinium-iridium
Structure Type Integral type, remote type, submersible type, ex-proof type
Medium Temperature -20~+60 degC(Integral type)
Remote type ( Neoprene ,Hard Rubber ,Polyurethane ,EPDM) -10~+80degC
Remote type(PTFE/PFA/FEP) -10~+160degC
Ambient Temperature -20~+60deg C
Ambient Humidity 5-100%RH(relative humidity)
Measuring Range Max 15m/s
Conductivity >5us/cm
Protection Class IP65(Standard); IP68(Optional for remote type)
Process Connection Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional)
Output Signal 4-20mA/Pulse
Communication RS485(Standard), HART(Optional),GPRS/GSM (Optional)
Power Supply AC220V (can be used for AC85-250V)
DC24V (can be used for DC20-36V)
DC12V (optional), Battery Powered 3.6V (optional)
Power Consumption <20W Alarm Upper Limit Alarm / Lower Limit Alarm Self-diagnosis Empty Pipe Alarm, Exciting Alarm Explosion Proof ATEX

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Electromagnetic flowmeters, also known as magmeters or magnetic flowmeters, typically generate electrical output signals proportional to the flow rate of a conductive fluid passing through a pipe. The most common output signals from electromagnetic flowmeters include:

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

Electromagnetic flowmeter is composed of electromagnetic flow sensor and electromagnetic flow converter. The main components are measuring tube, electrode, excitation coil, iron core and yoke, housing. The measuring tube of the sensor is a short non-magnetic alloy tube lined with insulating material.

Electromagnetic flowmeter is a widely used flow meter, in the process of use will inevitably appear some failures, then how to check the cause of the failure and eliminate it, the next Aister to teach you several simple troubleshooting methods.

The measurement of sewage by electromagnetic flowmeter generally does not require daily maintenance, but when the measured medium is easy to adhere to or scale the inner wall of the electrode and the measuring tube, it is necessary to regularly clean the inner wall of the measuring tube and the electrode, and be careful not to damage the flowmeter lining and the electrode.

Electromagnetic flowmeter grounding problem

Measuring medium: Conductive liquid
Diameter range: DN3mm～DN3000mm
Accuracy: ± 0.5% of the indicated value, optional ± 0.3% or ± 0.2%
Measuring range (Flow rate): 0.01m/s～15m/s

The electromagnetic flow meter consists of a non-conductive pipe lined with a conductive material, typically made of metal. The meter contains coils or electrodes positioned opposite each other on the pipe’s inner walls. A magnetic field is then generated by passing a current through these coils, creating a measurable voltage across the fluid. The induced voltage, or EMF, is directly proportional to the fluid’s velocity, allowing the flow meter to accurately determine the flow rate. Importantly, this principle remains effective regardless of the fluid’s conductivity, making electromagnetic flow meters suitable for a wide range of applications, including water, wastewater, and various industrial processes.

Sewage flowmeter can be widely used in municipal water supply, steel, petroleum, chemical, electric power, industry, water conservancy, water resources and other departments of liquid volume flow measurement, especially suitable for channels, small river flow measurement and environmental protection disposal of sewage measurement.