ultrasonic flow meter manufacturer

Ultrasonic flowmeters, with their unique technical advantages, have been widely applied in multiple key fields:

With the development of technological progress, more and more new types of instruments have been applied to the measurement of oil fields, such as ultrasonic flowmeters and mass flowmeters. Ultrasonic flowmeters have unique advantages when used for fluid measurement. They are non-contact instruments that do not change the form of the fluid, are easy to install, can measure the flow of strongly corrosive and non-conductive media, and the measurement process is not affected by physical parameters such as temperature, pressure, density and viscosity.

The external clamp-on ultrasonic flowmeter is a flow meter that is highly suitable for full pipe measurement in pipelines. It features easy installation, non-contact operation, and can measure the flow of large-diameter media as well as media that are difficult to contact and observe. Its measurement accuracy is very high and is almost unaffected by various parameters of the measured medium. It can especially solve the flow measurement problems of highly corrosive, non-conductive, radioactive and flammable and explosive media that other instruments cannot handle.

When it comes to ultrasonic flowmeters, it is essential to pay attention to the adaptability and requirements of installation. The main considerations include the installation direction of the flowmeter, the flow direction of the fluid, the configuration of upstream and downstream pipelines, the position of gate valves, protective accessories, pulse flow influence, vibration, electrical influence, and the maintenance of the flowmeter, etc.

Handheld ultrasonic flowmeters are widely used in industries such as water supply, heating, water conservancy, metallurgy, chemical engineering, and machinery. They can be used for production monitoring, flow comparison, temporary detection, and flow inspection, and are commonly used instruments for flow detection.

When the ultrasonic flowmeter shows unstable signals and inaccurate readings, many users tend to think that there is a problem with the ultrasonic flowmeter sensor. However, this is not always the case. Today, we will introduce to you the reasons why the ultrasonic flowmeter sensor is good but the flow rate is low or there is no flow rate at all.

1. Reflection issue

If the object being detected is always at the appropriate Angle, the ultrasonic sensor will obtain the correct Angle. But unfortunately, in practical use, few detected objects can be detected correctly.

Several types of errors may occur among them:

Ultrasonic flowmeters can generally operate normally for a long time without maintenance in the future. After that, maintenance and daily inspections are required. Not receiving the signal or having a too weak signal are both minor issues. So there’s no need to be surprised if it occurs. Just do the following steps carefully and it will be easy to solve.

The fixed ultrasonic flowmeter is a time-difference multi-functional ultrasonic liquid flowmeter that adopts new digital technology and is suitable for continuous measurement of full pipe liquid media.

Ultrasonic flowmeters usually have high accuracy in flow measurement. Ultrasonic flowmeters are easy to install and maintain, which makes them widely used in various fields such as petrochemicals, water conservancy projects, and energy.

The maintenance of the probe of ultrasonic flowmeters is a key link to ensure the accurate measurement and long-term stable operation of the flowmeters. The following are some specific maintenance methods and precautions:

Let’s first explore what water balance in a sewage treatment plant is: the balance of the total inflow and outflow of the sewage treatment plant. Nowadays, the issue of imbalance in the inflow and outflow of sewage treatment plants has increasingly drawn the attention of relevant regulatory authorities and various sewage operation companies. The imbalance between the influent and effluent water volumes is extremely severe, which is influenced by factors such as the sewage and sludge treatment process, the amount of reused water, the level of equipment, and the installation position of flow meters.

To ensure the normal operation of ultrasonic flowmeters, property owners must choose high-quality products. When selecting ultrasonic flowmeters, property owners can judge the product quality from these aspects.

Ultrasonic flowmeters, as very important flow measurement devices in various industrial fields, have a particularly significant adverse impact on measurement accuracy due to their sensors. Different types of sensors should be selected based on the differences in application environments. Today, Aister Instruments, a flowmeter manufacturer, will provide the following explanations regarding several different sensors.

Common faults and solutions encountered in the use of ultrasonic flowmeters for sewage

Ultrasonic flowmeters are flowmeters that measure flow by detecting the effect of fluid movement on ultrasonic beams (or ultrasonic pulses). Ultrasonic flowmeters can all be installed outside the pipe and measure flow in a non-contact manner. Their surface cost is basically independent of the size of the pipe diameter being measured, making them excellent instruments for measuring the flow of large pipes.

The accuracy of ultrasonic flowmeters in measuring fluid flow is closely related to the on-site working conditions. When selecting the position of the probe equipment, the following conditions should be met:

When installing the probe of the external clamp-on ultrasonic flowmeter, it is advisable to select the part with the finest pipe material as much as possible. The equipment area outside the pipe must be clean, and the rust and paint on the pipe surface need to be removed. If conditions permit, use a grinding machine to smooth and polish it, and then use a clean cloth dipped in acetone or alcohol to wipe off the oil stains and dust Next, apply a satisfactory coupling agent to the central part of the probe and the tube wall.

Ultrasonic flowmeter in the use of the process, encountered failures are more common, today the flowmeter manufacturer Aister meter in the form of questions and answers to make the common problems of ultrasonic flowmeter to sort out, hope to help you.

The installation of ultrasonic flowmeter is relatively simple and fast compared with other meters. However, the flowmeter manufacturer has to remind you that no matter how well the flowmeter is installed, it should also follow the installation requirements during the installation process.

Ultrasonic flowmeters can be used to measure the flow of fluids and large pipe runoff that are not easily accessible. In practical applications, if the temperature, pressure, the nature of the medium and other conditions are different from the calibration, it is necessary to calibrate the ultrasonic flowmeter, today we talk about the calibration method.

The correct selection of ultrasonic flowmeter can ensure the better use of ultrasonic flowmeter. What kind of ultrasonic flowmeter should be selected should be determined according to the physical and chemical properties of the measured flow medium. Today, flowmeter manufacturers tell you what to pay attention to before choosing ultrasonic flowmeter

Under the premise of fixed installation conditions, ultrasonic flowmeter improves the signal processing capacity and diagnostic capacity of the flowmeter itself, and can effectively reduce noise. Under normal circumstances, the measuring accuracy of the flowmeter is very important.

The reasonable selection of ultrasonic flowmeter model can ensure the more effective application of ultrasonic flowmeter. The choice of which type of ultrasonic flowmeter should be based on the physical and chemical properties of the measured medium to choose, so that the nominal diameter of the ultrasonic flowmeter, flow range, lining material, electrode material and output current can adapt to the nature of the measured medium and flow measurement requirements.

The installation of the ultrasonic flowmeter is simple and convenient in the installation of all flowmeters, as long as you choose a suitable measuring point, input the pipe parameters at the measuring point into the flowmeter, and then fix the probe on the pipe. Today, flowmeter manufacturer Aister instrument makes the following analysis for you on this topic.

Ultrasonic flowmeter installation, easy maintenance, cost-effective. However, no matter how good the flowmeter is, it also needs special attention in daily use. Otherwise, it will affect the measuring accuracy and service life of the flowmeter. Today, flowmeter manufacturer Aister meter mainly explains the maintenance and maintenance of ultrasonic flowmeters as follows.

Ultrasonic flowmeter is a non-contact instrument, so it has the advantages of simple installation and maintenance, and is very popular with customers. However, because of this advantage of ultrasonic flowmeters, it is precisely after a period of use that the signal will be weak.

1, ultrasonic flowmeter probe used for a period of time, there will be irregular alarm. Especially when there are more impurities in the conveying medium, this problem will be more common.
Solution: Clean the probe regularly (cleaning once a year is recommended).

Ultrasonic flowmeter in the industrial automation more and more wide range of use, many owners in the purchase of ultrasonic flowmeter, will encounter some easy to ignore in the selection of parameters, in view of this phenomenon, Aister instrument to give you a few ultrasonic flowmeter selection needs some parameters.